THEMA:

Geschrieben von Mr Jaja am 04. Mai 2007 17:12:40:
Als Antwort auf: Re: Noch mal Amaturen Brett (o.T.) geschrieben von Andreas am 04. Mai 2007 09:15:27:

Und genau das ist was passiert ist:

Now... the dash bow. This is a tough one. It doesn't quite fit without being bent a little bit. Its only held in by two screws. You can find them under the speaker grill. Remove them and the piece should be loose. There are clips that hold the piece down about about 1/4 of the way in on each end... sliding the piece foward will release them. I have found the best approach is to lift the left edge up a bit and slide it a little to the left. Then, on the right, lift up the edge and bring it back. The piece is a bit too long to clear the pillar, so with some pressure it will bend. Its very tight, and if the wood is damage or very dry, you can easily break it. Be very very careful!
Aber Aluminium will das ersetzen.

Mr.JAJA

www.putzkes-fahrspass.com